Product


The production process of Pemoda door starts from imported raw spruce lumber;

The serenes manufactured from spruce material with finger jointed, calibrated and fired by 10% (± 2) decrease in humidity are used double under the door, two way reinforcement at the lock places, and wedges for balancing are used at the corners and wing frames are prepared in this way.

Inner padding material was dampened, the water vapor formed during pressing was homogeneously distributed in the construction and then the interior was perforated in order to prevent deformation of the door and the caddy had a hole of 3,175 gr / m2 2.1 kg / cm1.4 mm in diameter and kraft honeycomb paper is used to fill all sides of the wing. Prepared skeletons are prepared by prepainted panel, melamine panel, 6mm mdf and wooden papel coating according to the type of the door.

The presten is then taken to the pvc banding machine for the damping of the door pomels, which are sized in a 3-dimensional cnc machine, and then painted, varnished, etc., For the operations doors are taken to the paint.

Pemodorda casks are prepared in the sandwich case type with 18mm spruce and 12mm mdf on the lower profile. The frames and hoods prepared in the profile machine can be painted according to the custom in the profile wrapping machine. They are wrapped with PP, micro laminates and coating and participate in other operations in the door wing. In skirtings and moldings, after the molding machine, the profile is wrapped in the wrapping machine according to the type and completed with the processes in the paint.

All of this process is followed by the doors, wing, case and mold accessories and the last control is packaged and shipped to our customers.

All production is meticulously done with state of the art machines and trained staff. The machines we use in door production are;

MACHINE TYPE YEAR CAPACITY / DAILY
3D CNC SIZE-DESIGN-FUGA MACHINE 2013 240 DOOR
CNC PANEL SIZING MACHINE 2008 100 PLATE
PROFILE MACHINE 2008 400TK CASE
SILL MACHINE 2008 460TK SILL
CASA-SILL PACKING MACHINE 2010-2014 500TK SILL-200TK CASE
CALIBER GRINDING MACHINE 2010 400 DOOR
DOOR BANDING MACHINE 2013 900 DOOR
DOOR PRESS 2008-2010-2013 340 DOOR
CASE-SILL PAINT LINE 2012 500TK SILL-200TK CASE
PANEL DIMENSION 2010 250 PLATE
HINGE 2012 120 DOOR
CASE 45 CUTTING DIMENSION 2012 140 DOOR
FINGER JOINT ADDING LINE 2015 9 M3
OPTIMIZE REMOVAL 2007 12 M3
PANEL PRESS 2016 130 PIECE INDOOR PANEL (SANDWICH PANEL)
MULTI SLICING 2016 200 PIECE SANDWICH PANEL
SIDE CUTING 2013 15 M3
LOG CUTTING MACHINES 1982 25 M3
SCREW COMPRESSOR 2 PIECES 2007-2014
FORKLIFT 2003 4 TON
TRACTOR 2000
WAY FLOOR CUTTING 2 PIECES 2007 -2011