2 Inner core; For door inner core material there will be used for both flanks Kadoma™(TSE) 3,175 gr / m2 2,1 kg/ cm1.4 mm caliber moisture soaked-up, for the homogeneous dispersion of the water steam in the construction while the pressing and for after the pressing for preventing the deformation of the door with internal holes, and then filling up both flanks with kraft-comb paper, also
3 Surface: There will be used 5,0 mm TSE normed 1st quality tabled MDF panel. The door panel will be pressed both sided on the prepareted door construction after the alpi wood plate is prepared.
4 Glue and Pressing: The glue is normed as the E1 standarts and don`t contain carcinogenic ingredient. The products will dimensioned to after 24 hours of get pressed.
5 Casings; are manufactured of 41 mm thick composite sandwich panel. After finishing the rough casing, the alpi wood plates wich is used on the door surface provide the same naturally sight like the door by plating at tube winding mills. There will be used adequate dye and polish process for the surface texture of the doors.
6 Adjustable Moldings; will be plated with MDF Ontop Molding Plate in the sections 80x12 mm for the casing sprits and 80x9 mm for the casing headpieces.
7 Dyeing Process; It will be coloured with Polyurthane varnish.
Teak PM - 09
Sultan Exhaust Glass
Teak PM - 10
Teak PM - 07
Zeytin - PM 05
Zeytin - PM 06
American Walnut - PM 02
Wooden Walnut Glass
Lacquer American Walnut - PM 01
Oak - PM 03
Zeytin - PM 04
PM 07 - GLAZED PM 08
PM 16 GLAZED PM 17
GLAZED PM19 -PM 20