2 Inner core; For door inner core material there will be used for both flanks Kadoma™(TSE) 3,175 gr / m2 2,1 kg/ cm1.4 mm caliber moisture soaked-up, for the homogeneous dispersion of the water steam in the construction while the pressing and for after the pressing for preventing the deformation of the door with internal holes, and then filling up both flanks with kraft-comb paper, also
3 Surface: There will be used 5,0 mm TSE normed 1st quality tabled MDF panel and it`ll be pressed both sided on the door construction.
4 Glue and Pressing: The glue is normed as the E1 standarts and don`t contain carcinogenic ingredient. The products will dimensioned to after 24 hours of get pressed.
5 Casings; are manufactured of 41 mm thick composite sandwich panel. After finishing the rough casing it`ll be winded by tube winding mills with P.P.(Polyplorine Lacquering) material.
6 Adjustable Moldings; will be winded with MDF Ontop Molding P.P.(Polyplorine Lacquering) in the sections 80x12 mm for the casing sprits and 80x9 mm for the casing headpieces.
7 Dyeing Process; after the doors passes the calibration there will be drop 2 coat primer of polyurethane, thereafter will applied 320 and 400 sandpaper process and then there will be made colouring process by using 3 coat matt lacquer dye. The version is "SARE MODELİ MAT LAKE BEYAZ"(Version SARE Matt Lacquered White).
Lacquer - PL 01
Lacquer - PL 04
Lacquer - PL 02